Below you’ll find the technical specification for Estimote Proximity Beacons, Location Beacons, Location Beacons with UWB, LTE Beacons, and Stickers. If you encounter problems with customs clearance and need to provide more in-depth documentation, please contact our Community Team.
Proximity Beacons
Identification (hardware revision) |
J 1.6 |
MCU |
Bluetooth® SoC ARM® Cortex®-M4 32-bit processor with FPU 64 MHz Core speed 512 kB Flash memory 64 kB RAM memory
|
Radio: 2.4 GHz transceiver |
Bluetooth® 4.2 LE standard Range: up to 100 meters (330 feet) Output Power: -20 to +4 dBm in 4 dB steps, “Whisper mode” -40 dBm Sensitivity: -96 dBm Frequency range: 2400 MHz to 2483.5 MHz No. of channels: 40 Adjacent channel separation: 2 MHz Modulation: GFSK (FHSS) Antenna: IFA PCB Antenna Gain: 0 dBi Over-the-air data rate: 1 Mbps (2 Mbps supported)
|
Sensors |
Motion sensor (Ultra-low-power, high-performance, 3-axis "femto" accelerometer) Temperature sensor
|
Additional features |
NFC
RGB LED
|
Power Supply |
2 * alkaline LR6 batteries (AA type) (replaceable)
|
Environmental Specification |
Operating Temperature: 0°C to 60°C (32°F to 140°F) Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F) Relative Humidity (operating): 20% to 80% relative humidity Relative Humidity (storage): 10% to 90% relative humidity, non-condensing Splash-proof
|
Materials |
Non-flammable Enclosure: silicone Adhesive layer: double-sided adhesive tape
|
Size and Weight |
Length 69,5 mm (2.74 inches) Width: 46.4 mm (1.83 inches) Height: 24.7 mm (0.97 inches) Weight: 86 g (3.03 ounces) |
Location Beacons
Identification (hardware revision) |
F3.3
|
MCU |
Bluetooth® SoC ARM® Cortex®-M4 32-bit processor with FPU 64 MHz Core speed 512 kB Flash memory 64 kB RAM memory
|
Radio: 2.4 GHz transceiver |
Bluetooth® 4.2 LE standard Range: up to 200 meters (650 feet) Output Power: -20 to +4 dBm in 4 dB steps, “Whisper mode” -40 dBm, "Long range mode" +10 dBm Sensitivity: -96 dBm Frequency range: 2400 MHz to 2483.5 MHz No. of channels: 40 Adjacent channel separation: 2 MHz Modulation: GFSK (FHSS) Antenna: PCB Meander, Monopole Antenna Gain: 0 dBi Over-the-air data rate: 1 Mbps (2 Mbps supported)
|
Sensors |
Motion sensor (3-axis) Temperature sensor Ambient Light sensor Magnetometer (3-axis) Pressure sensor EEPROM Memory 1 Mb RTC clock
|
Additional features |
GPIO NFC
|
Power Supply |
4 x CR2477 – 3.0V lithium primary cell battery (replaceable) High efficient Step-Down DC-DC converter
|
Environmental Specification |
Operating Temperature: 0°C to 60°C (32°F to 140°F) Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F) Relative Humidity (operating): 20% to 80% relative humidity Relative Humidity (storage): 10% to 90% relative humidity, non-condensing Splash-proof
|
Materials |
Non-flammable Enclosure: silicone Adhesive layer: double-sided adhesive tape
|
Size and Weight |
Length: 62.7 mm (2.47 inches) Width: 41.2 mm (1.62 inches) Height: 23.6 mm (0.93 inches) Weight: 67g (2.36 ounces)
|
Location Beacons with UWB
Identification (hardware revision) |
I1.2
|
MCU |
Bluetooth® SoC ARM® Cortex®-M4 32-bit processor with FPU 64 MHz Core speed 512 kB Flash memory 64 kB RAM memory
|
Radio: 2.4 GHz transceiver |
Bluetooth® 4.2 LE standard Range: up to 200 meters (650 feet) Output Power: -20 to +4 dBm in 4 dB steps, “Whisper mode” -40 dBm, "Long range mode" +10 dBm Sensitivity: -96 dBm Frequency range: 2400 MHz to 2483.5 MHz No. of channels: 40 Adjacent channel separation: 2 MHz Modulation: GFSK (FHSS) Antenna: PCB Meander, Monopole Antenna Gain: 0 dBi Over-the-air data rate: 1 Mbps (2 Mbps supported)
|
Ultra Wideband (UWB)
|
IEEE802.15.4-2011 UWB compliant Precision real time location systems (RTLS) using two-way ranging Ranging accuracy (using two-ranging scheme)up to 25cm Usable ranging distance indoors- up to 30m (in real world conditions between 2 UWB beacons) Support for 6 RF bands from 3.5 GHz to ^.5 GHz
|
Sensors |
Motion sensor: ultra-low-power, high-performance, 3-axis "femto" accelerometer Temperature sensor Ambient Light sensor Pressure sensor EEPROM Memory 1 Mb RTC clock
|
Additional features |
GPIO
NFC
|
Power Supply |
3 x CR123A – 3.0V lithium primary cell battery (replaceable) High efficient Step-Down DC-DC converter
|
Environmental Specification |
Operating Temperature: 0°C to 60°C (32°F to 140°F) Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F) Relative Humidity (operating): 20% to 80% relative humidity Relative Humidity (storage): 10% to 90% relative humidity, non-condensing Splash-proof
|
MaterialsN |
Non-flammable Enclosure: silicone Adhesive layer: double-sided adhesive tape
|
Size and Weight |
Length: 75.25 mm (2.96 inches) Width: 49.63 mm (1.95 inches) Height: 27.1 mm (1 inche) Weight: 98g (3.45 ounces)
|
Stickers
Identification (model number) |
SB0 |
MCU |
Bluetooth® SoC ARM® Cortex®-M0 32-bit processor 16 MHz Core speed 256 kB Flash memory 16 kB RAM memory
|
Radio: 2.4 GHz transceiver |
Bluetooth® 4.2 LE standard Range: up to 15 meters (50 feet) Output Power: -20 to +4 dBm in 4 dB steps, “Whisper mode” -30 dBm Sensitivity: -93 dBm Frequency range: 2400 MHz to 2483.5 MHz No. of channels: 40 Adjacent channel separation: 2 MHz Modulation: GFSK (FHSS) Antenna: Omnidirectional chip antenna Antenna Gain: 0 dBi Over-the-air data rate: 1 Mbps (2 Mbps supported)
|
Sensors |
Motion sensor (Ultra-low-power, high-performance, 3-axis "femto" accelerometer) Temperature
|
Power Supply |
1 x CR2020 – 3.0V lithium primary cell battery (not replaceable)
|
Environmental Specification |
Operating Temperature: 0°C to 60°C (32°F to 140°F) Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F) Relative Humidity (operating): 20% to 80% relative humidity Relative Humidity (storage): 10% to 90% relative humidity, non-condensing
|
Materials |
Non-flammable Enclosure: polyurethane With an intrinsic adhesive layer
|
Size and Weight |
Variable |
LTE Beacon
Identification (hardware revision) |
A1.1 |
MCU |
Bluetooth® SoC ARM® Cortex®-M4 32-bit processor with FPU Long range HW support USB support 1MB Flash 256kB Ram
|
RF interfaces
|
LTE Cat.M1/NB IoT with fallback to 2G (GPRS)/2.75G( EDGE) Bluetooth® 5 LE with +20 dBm amplifier and LNA, embedded PCB antenna GNSS( GPS, COMPASS, GLONASS) - with embedded active patch antenna
|
Sensors |
Motion sensor: ultra-low-power, high-performance, 3-axis "femto" accelerometer Temperature sensor Battery Fuel Gauge: precise battery state of charge estimation. RTC clock: full scale temperature compensated. Accuracy: 1.9 ppm ( 0 to +50°C); Accuracy: 3.4 ppm ( -40 to +85°C)
|
Additional Features |
Programmable push button for specific use-cases such as alerts Programmable RGB LEDs
|
Power supply
|
Rechargeable Li-Po 3.7V battery with PCM. Capacity: 800 mAh Embedded battery IC charger Operating Temperatures:
-Discharge:-10°C ~ +55°C (14°F to 131°F) -Charge: 0 °C ~ +43°C (32°F to 109°F)
|
USB-C connector |
Compatible with USB 2.0 FS Battery charging feature - IC charger (5V -> 4.2V) on the PCB IP67 rating
|
Environmental Specification |
Operating Temperature: 0°C to 55°C (32°F to 131°F) Storage Temperature (recommended): 15°C to 30°C (59°F to 86°F) Relative Humidity (operating): 20% to 80% relative humidity Relative Humidity (storage): 10% to 90% relative humidity, non-condensing Splash-proof
|
Materials |
Non-flammable Enclosure: silicone Adhesive layer: double-sided adhesive tape
|
Size and Weight
|
Length 90 mm (3.54 inches) Width: 90 mm (3.54 inches Height: 16 mm (0.63 inches) Weight: 57 g (2.01 ounces)
|
You might be also interested in learning if beacons can work outdoors.